Technologies and ProductsAnritsu Corporation has introduced a measurement function (MS9740B-020) for its Optical Spectrum Analyzer MS9740B that evaluates a pulsed Laser Diode (LD) chip. The company says the new solution reduces the test time for pulsed LD chip, contributing to improved production efficiency of high-power LD chip. The new MS97040B-020 solution accelerates optical spectrum evaluation by eliminating […]
Technologies and ProductsAnritsu Corporation has upgraded its Network Master Pro 1040A to support tests of 400GBASE-ZR standard optical modules, facilitating low-cost DCI. The company has also developed its optional Ethernet 4x100G N Port BERT and Ethernet 2x200G N Port BERT M1040A software solutions for breakout-type communications quality tests to reduce DCI test workloads. Anritsu says these upgraded […]
Technologies and ProductsAnritsu Corporation has upgraded its Network Master Pro MT1040A tester with the launch of its 400G dual/100G quad channel expansion MT1040A-020 option, which supports simultaneous dual-port 400GbE measurements using a combination of two 400G measurement modules. Anritsu says that since data Tx and Rx tests can be performed simultaneously, it is now possible to test […]
Technologies and ProductsLuton United Kingdom, January 23, 2020 – Anritsu Corporation is now supporting FEC tests of 400-GbE and next-generation 800-GbE QSFP-DD and OSFP transceivers by adding PAM4 PPG 8ch synchronous/FEC pattern-generation functions to the company’s Signal Quality Analyser-R MP1900A series. FEC is being adopted at data centres using PAM4 to implement faster and larger-capacity 400-GbE, etc., […]
Technologies and ProductsAnritsu Corporation has launched a PAM4 Error Detector (ED), supporting 116-Gb/s bit error rate tests. The new module for the Anritsu Signal Quality Analyzer-R MP1900A series is claimed to be the only instrument to achieve error-free measurement of PAM4 signals at 116 Gbps with industry-best operation bit rates and high Rx sensitivity. Combined with the […]
Technologies and ProductsTest equipment manufacturer Anritsu, will demonstrate its new PAM4 Error Detector module for its Signal Quality Analyser-R MP1900A Series PAM4 BERT on booth #28, at the ECOC Exhibition 2019 in Dublin, Ireland, from September 23 to 25 September 2019. With what the company claims is the world’s highest operation bit rate and Rx sensitivity, this […]
Technologies and ProductsAnritsu has launched its new Spectrum Analyser MS9740B, which has been developed for evaluating the output characteristics of optical active devices used by optical communications systems. The MS9740B keeps the same measurement-sensitivity performance, functions, and size as the predecessor (MS9740A) while shortening measurement processing times by 50%. The MS9740B also improves production-line efficiency by optimising […]
News and BusinessTest and measurement industry veteran promoted to oversee US operations The Board of Directors of Anritsu Corporation have announced that the global communications leader has named Donn Mulder (pictured) president and chief financial officer of Anritsu Company, the United States subsidiary of Anritsu Corporation, effective April 1st, 2019. In his new position, Mulder will oversee […]
Technologies and ProductsAnritsu Corporation has enhanced its Signal Quality Analyser-R MP1900A BERT, with the introduction of four PAM4 BERT options adding multichannel synchronisation, multilane FEC pattern generation for 400GbE, Inter Symbol Interference (ISI) stressed signal generation to simulate transmission path losses, and application software for capturing device under test (DUT) error counts. The new options allow engineers […]
Technologies and ProductsAnritsu Corporation has announced the start of firmware downloads adding a 53 Gbaud PAM4 analysis function to the previous 26 Gbaud support for the company’s BERTWave MP2110A sampling oscilloscope that is targeted at production and inspection of optical modules. As well as featuring both high-sensitivity and high-speed measurements, with this release the the MP2110A now […]
Technologies and ProductsNew software allows PIM measurements to be conducted in the field, saving time and cost. Diversified communications solutions developer Anritsu has introduced PIM-over-CPRI software for its BTS Master MT8220T and MT822xB handheld base station analyzers that allow passive intermodulation (PIM) measurements to be made from the ground for the first time. By eliminating the need […]
Technologies and ProductsAnritsu has announced the launch of five new 5G measurement software options for its MS2850A Signal Analyzer. The five new software options are compliant with the 3GPP 5G standards (“5G NR”) and designed to be used for measuring the RF Tx characteristics of next-generation 5G base stations and mobile terminals. The five packages are 5G […]
Technologies and ProductsTest systems maker showcases systems for ultra-fast characterization of optical modules. Anritsu used ECOC 2017 to demonstrate its recently-released MP1900A Signal Quality Analyser-R. The MP1900A series is a high-performance Bit Error Rate Tester that accurately measures communications equipment, next-generation high-speed electronic and optical devices, including those for M2M and IoT applications, and optical transceivers used […]
Technologies and ProductsAnritsu has introduced a 100G Multirate Module for its Network Master Pro MT1000A all-in-one tester that supports interface rates from 10 Mbps to 100 Gbps, and technologies including Ethernet, Optical Transport Networks (OTN), SDH/SONET, Fibre Channel, and CPRI/OBSAI. With the 100G Multirate Module installed, the Network Master Pro MT1000A supports more interface standards than any […]
Technologies and ProductsAnritsu and ETS-Lindgren have announced the additional support of 2G to 4G/LTE/MIMO/CA Over-the-Air (OTA) testing with an “enhanced solution” that integrates the Anritsu MT8821C RF tester with the CTIA-compliant ETS-Lindgren EMQuest EMQ-100 Antenna Measurement Software. The flexible solution now supports 2 and 3 Carrier Aggregation (3CA), and 2×2 MIMO providing user equipment developers and manufacturers […]
Technologies and ProductsAnritsu has introduced its Signalling Tester MD8475B, the first all-in-one test solution supporting up to four component carrier aggregation and 2×2 MIMO in a single test box. Integrated with the SmartStudio GUI, the MD8475B lowers cost-of-test and reduces space requirements compared to conventional solutions that require several test instruments, providing engineers with an efficient tool to […]
Technologies and ProductsAnritsu has released the company’s new software packages for evaluating LTE-Advanced UE supporting downlink (DL) 4×4 MIMO and Downlink Carrier Aggregation (DL CA) 5CCs and strengthening the wireless test functions of the all-in-one Radio Communication Analyzer MT8821C. The released software comprises: MX882112C-012 LTE FDD 4×4 MIMO DL ; MX882113C-012 LTE TDD 4×4 MIMO DL; MX882112C-051 LTE-Advanced […]