Anritsu enhances field-portable Network Master Pro with 100G CFP4, QSFP28, SFP28 support

Created June 19, 2017
Technologies and Products

Anritsu has introduced a 100G Multirate Module for its Network Master Pro MT1000A all-in-one tester that supports interface rates from 10 Mbps to 100 Gbps, and technologies including Ethernet, Optical Transport Networks (OTN), SDH/SONET, Fibre Channel, and CPRI/OBSAI.

With the 100G Multirate Module installed, the Network Master Pro MT1000A supports more interface standards than any other handheld transport tester on the market. The all-in-one tester meets requirements for CFP4/QSFP28 (100GbE/OTU4), QSFP+ (40GbE/OTU3), SFP28 (25GbE), SFP+/SFP (GbE-10GbE/OTU1-OTU2/STM1-64/OC3-192/1GFC-16GFC/CPRI1-8/OBSAI1x-8x), and RJ45 (10 Mbps-1 Gbps). Its flexible design provides single- and dual-port configurations with field upgradability across testing technologies to provide a simple upgrade path, when necessary, for a future-proof investment.

Further information

anritsu-enhances-field-portable-network-master-pro-100g-cfp4-qsfp28-sfp28-support

This article was written
by Optical Connections News Team


You may also be interested in...

  • Technologies and Products

    Anritsu upgrades portable 400G network tester

    Anritsu Corporation has upgraded its Network Master Pro MT1040A tester with the launch of its 400G dual/100G quad channel expansion MT1040A-020 option, which supports simultaneous dual-port 400GbE measurements using a combination of two 400G measurement modules. Anritsu says that since data Tx and Rx tests can be performed simultaneously, it is now possible to test […]

    Read More
  • Technologies and Products

    ECOC 2017: Anritsu shows off MP1900A Signal Quality Analyzer

    Test systems maker showcases systems for ultra-fast characterization of optical modules. Anritsu used ECOC 2017 to demonstrate its recently-released MP1900A Signal Quality Analyser-R. The MP1900A series is a high-performance Bit Error Rate Tester that accurately measures communications equipment, next-generation high-speed electronic and optical devices, including those for M2M and IoT applications, and optical transceivers used […]

    Read More
  • Technologies and Products

    Anritsu enhances field-portable Network Master Pro with 100G CFP4, QSFP28, SFP28 support

    Anritsu has introduced a 100G Multirate Module for its Network Master Pro MT1000A all-in-one tester that supports interface rates from 10 Mbps to 100 Gbps, and technologies including Ethernet, Optical Transport Networks (OTN), SDH/SONET, Fibre Channel, and CPRI/OBSAI. With the 100G Multirate Module installed, the Network Master Pro MT1000A supports more interface standards than any […]

    Read More